75W Triple Output with PFC Function ITTP-75W

Features:


  • * Universal AC input / Full range
  • * Built-in active PFC function, PF>0.95
  • * Protections: Short circuit / Overload / Over voltage
  • * LED indicator for power on
  • * Cooling by free air convection
  • * Fixed switching frequency at PFC:67KHz PWM : 134KHz
  • * 2 years warranty
  • Product Detail

    Product Tags

    MODEL TP-75Ⅰ TP-75Ⅱ TP-75Ⅲ
    OUTPUT OUTPUT NUMBER CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3
    DC VOLTAGE 5V 12V -5V 5V 12V -12V 5V 12V -15V
    RATED CURRENT 7A 3A 0.6A 7A 3A 0.4A 6A 2.5A 0.5A
    CURRENT RANGE 1.5 ~10A 0.2 ~4A 0 ~ 0.6A 1.5 ~10A 0.2 ~4A 0 ~ 0.6A 1.5 ~10A 0.2 ~3A 0 ~ 0.6A
    RATED POWER 74W 75.8W 75W
    RIPPLE&NOISE (max.)  Note.2 100mVp-p 120mVp-p 100mVp-p 100mVp-p 120mVp-p 120mVp-p 100mVp-p 120mVp-p 120mVp-p
    VOLTAGE ADJ. RANGE   CH1: 4.75 ~ 5.5V
    VOLTAGE TOLERNCE  Note.3 ±3.0% ±4.0% ±8.0% ±3.0% ±4.0% ±8.0% ±3.0% ±4.0% ±8.0%
    LINE REGULATION      Note.4 ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
    LOAD REGULATION    Note.5 ±3.0% ±4.0% ±8.0% ±3.0% ±4.0% ±3.0% ±3.0% ±4.0% ±8.0%
    SETUP, RISE TIME 800ms, 60msat full load
    HOLD UP TIME (Typ.) 36ms at full load
    INPUT  VOLTAGE RANGE 90-264VAC               127-370VAC
    FREQUENCY RANGE 47 ~ 63HZ
    POWER FACTOR (Typ.) PF>0.95/230VAC      PF>0.98/115VAC at full load
    EFFICIENCY (Typ.) 70.0%
    AC CURRENT (Typ.) 1.5A/115VAC        0.8A/115VAC
    INRUSH CURRENT (Typ.) COLD START 20A/230VAC
    LEAKAGE CURRENT <2mA / 240VAC
    PROTECTION  OVERLOAD 105 ~ 150% rated output power
    Protection type: Hiccup mode, recovers automatically after fault condition is removed
    OVER VOLTAGE 5.75 ~ 6.75 on+5V
    Protection Type: Shut off o/p voltage,  re-power on to recover
    ENVIRONMENT WORKING TEMP. -10 ~ +60 (Refer to output load derating curve)
    WORKING HUMIDITY 20%~ 90%,RH non-condensing
    STORAGE TEMP., HUMIDITY -20 ~ +85°C,  10 ~ 95%RH
    TEMP. COEFFICIENT ±0.03%/°C (0 ~ 50°C)
    VIBRATION 10-500HZ, 2G 10min./1 cycle, 60min. each along X, Y, Z axes
    SAFETY &
    EMC (Note 6)
    SAFETY STANDARDS UL60950-1, CCC GB4943 approved
    WITHSTAND VOLTAGE I/P-O/P:3KVAC  I/P-FG:1.5KVAC   O/P-FG: 0.5KVAC 1min.
    ISOLATION RESISTANCE I/P-O/P,I/P-FG:100MOhms/ 500VDC / 25℃/ 70%RH
    EMC CONDICTION & RADIATION Compliance to EN55032 (CISPR32) Class B
    HARMONIC CURRENT Compliance to EN61000-3-2,-3
    EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, 
    light industry level, criteria A
    OTHERS MTBF 198.4Khrs min.        MIL-HDBK-217F (25°C)
    DIMENSION 164*97*29.2mm (L*W*H)
    PACKING 0.65Kg; 20pcs/12.7Kg/0.64CUFT
    NOTE 1. All parameter NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
    2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
    3. Tolerance: includes set up tolerance, line regulation and load regulation.
    4. The power supply is considered a component which will be installed to a final equipment.
    The final equipment must be re-confirmed that it still meets EMC directives.5.
    Derating may be needed under low input voltages. Please check the derating curve for more details.

    LOGO175W  Triple Output with PFC Function  ITTP-75 series

    Dimension

    13254 2343

    Terminal Pin No. Assignment      
    Pin No. Assigment
    1 AC/L
    2 AC/N
    3 FG
    4,6 DC OUTPUT -V
    7 DC OUTPUT +V3
    8 DC OUTPUT +V2
    9 DC OUTPUT +V1

  • Previous:
  • Next:

  • Related Products

    WhatsApp Online Chat !