200W Quad Output with PFC Function ITQP-200W

Features:


  • * Universal AC input / Full range
  • * Built-in active PFC function, PF>0.95
  • * Protections: Short circuit/ Overload / Over voltage/ Over temperature
  • * Free air cooling convection
  • * CH1, 2 can be adjustable from -5~+10%
  • * With power good and fail signal output (Optional)
  • * 100% full load burn-in test
  • * CH4 can set to positive after consult us before delivery (Optional)
  • * Fixed switching frequency at PFC:67HKz PWM: 134KHz
  • * 2 years warranty
  • Product Detail

    Product Tags

    MODEL QP-200Ⅳ QP-200Ⅵ QP-200-3Ⅰ
    OUTPUT OUTPUT NUMBER CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4
    DC VOLTAGE 5V 3.3V 24V -12V 5V 15V 24V -15V 5V 3.3V 12V -15V
    RATED CURRENT 15A 4A 3A 0.7A 15A 3A 3A 0.7A 15A 15A 6A 0.7A
    CURRENT RANGE 3 ~20A 0 ~6A 0.4 ~5A 0 ~ 1A 3 ~20A 0 ~5A 0.4 ~5A 0 ~ 1A 3 ~20A 0 ~20A 0.5 ~8A 0 ~ 1A
    RATED POWER 203.4W 202.5W 200W
    PEAK CURRENT Note.4 20A 20A 8A 1A 20A 20A 7A 1A 20A 20A 6A 1A
    RIPPLE&NOISE (max.) Note.2 100mVp-p 150mVp-p 150mVp-p 150mVp-p 100mVp-p 150mVp-p 150mVp-p 150mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p
    VOLTAGE ADJ. RANGE   CH1: 4.75 ~ 5.5V  CH2: 3.14 ~ 3.63V CH1: 4.75 ~ 5.5V  CH2: 11.4 ~ 13.2V CH1: 4.75 ~ 5.5V  CH2: 14.3 ~ 16.5V
    VOLTAGE TOLERNCE Note.3 ±3.0% ±3.0% ±6.0% ±5.0% ±3.0% ±3.0% ±6.0% ±5.0% ±3.0% ±3.0% ±6.0% ±5.0%
    LINE REGULATION Note.4 ±1.0% ±1.0% ±2.0% ±1.0% ±1.0% ±1.0% ±2.0% ±1.0% ±1.0% ±1.0% ±2.0% ±1.0%
    LOAD REGULATION    Note.5 ±2.0% ±2.0% ±6.0% ±2.0% ±2.0% ±2.0% ±6.0% ±2.0% ±2.0% ±2.0% ±6.0% ±2.0%
    SETUP, RISE TIME 800ms, 50ms at full load
    HOLD UP TIME 6 24ms at full load
    INPUT  VOLTAGE RANGE 90-264VAC               127-370VAC
    FREQUENCY RANGE 47 ~ 63HZ
    POWER FACTOR (Typ.) PF>0.95/230VAC      PF>0.98/115VAC at full load
    EFFICIENCY (Typ.) 75.0% 75.0% 72.0%
    AC CURRENT (Typ.) 3.5A/115VAC          2A/230VAC
    INRUSH CURRENT (Typ.) COLD START ≦ 40A/230VAC
    LEAKAGE CURRENT <2mA / 240VAC
    PROTECTION  OVERLOAD 105 ~ 150% rated output power
    Protection type: Hiccup mode, recovers automatically after fault condition is removed
    OVER VOLTAGE CH1: 5.75~6.75V   CH2: 3.8~4.4V CH1: 5.75~6.75V   CH2: 13.8~16.2V CH1:5.75~6.75V  CH2:17.25~20.25V
    Protection Type: Shut off o/p voltage,  re-power on to recover
    OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down
    ENVIRONMENT WORKING TEMP. -10 ~ +60 (Refer to output load derating curve)
    WORKING HUMIDITY 20%~ 90%,RH non-condensing
    STORAGE TEMP., HUMIDITY -20 ~ +85°C,  10 ~ 95%RH
    TEMP. COEFFICIENT ±0.03%/°C (0 ~ 50°C)
    VIBRATION 10-500HZ, 2G 10min./1 cycle, 60min. each along X, Y, Z axes
    SAFETY &
    EMC  (Note 6)
    SAFETY STANDARDS UL60950-1, CCC GB4943 approved
    WITHSTAND VOLTAGE I/P-O/P:3KVAC  I/P-FG:2KVAC   O/P-FG: 0.5KVAC 1min.
    ISOLATION RESISTANCE I/P-O/P,I/P-FG:100MOhms/ 500VDC / 25℃/ 70%RH
    EMC EMISSION Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020
    EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, light industry level, criteria A TP TC 020
    OTHERS MTBF 160.6Khrs min.        MIL-HDBK-217F (25°C)
    DIMENSION 215*115*2932mm (L*W*H)
    PACKING 1.2Kg; 12pcs/15.4Kg/0.92CUFT
    NOTE 1. All parameter NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
    2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
    3. Tolerance: includes set up tolerance, line regulation and load regulation.  
    4. The power supply is considered a component which will be installed to a final equipment. All the EMC tests are been executed
    by mounting kthe unit on a 230mm*230mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still
     meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
    5. The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000mm(6500ft)

    LOGO1200W  Quad Output with PFC Function ITQP-200W

      Dimension

    11 22

     

    Terminal Pin No. Assignment     
    Pin No. Assigment
    1 AC/L
    2 AC/N
    3 FG
    4 DC OUTPUT +V4
    5 DC OUTPUT +V3
    6 DC OUTPUT +V2
    7,8 DC OUTPUT -V
    9 DC OUTPUT +V1

  • Previous:
  • Next:

  • Related Products

    WhatsApp Online Chat !