200W Single Output Switching Power Supply DPR-200W

Features:


  • * Low leakage current <1mA
  • * Protections: Short circuit / Overload / Over voltage / Over temperature
  • * Cooling by free air convection
  • * LED indicator for power on
  • * 100% full load burn-in test
  • * Low cost, high power reliability
  • * 2 years warranty
  • Product Detail

    Product Tags

    MODEL DPR-200-4 DPR–200-4.5 DPR–200-5
    OUTPUT DC VOLTAGE 4V 4.5V   5V  
    RATED CURRENT 40A 40A 40A
    CURRENT RANGE 0~ 40A 0 ~ 40A 0 ~ 40A
    RATED POWER 160W 180W 200W
    RIPPLE&NOISE (max.)  Note.2 150mVp-p 150mVp-p 150mVp-p
    VOLTAGE ADJ. RANGE   3.5~5V 4.0-5.5V 4V~5.5V
    VOLTAGE TOLERNCE  Note.3 ±2.0% ±2.0% ±2.0%
    LINE REGULATION      Note.4 ±0.5% ±0.5% ±0.5%
    LOAD REGULATION    Note.5 ±1.5% ±1.5% ±1.0%
    SETUP, RISE TIME 1500ms, 10ms/230VAC      2500ms, 100ms/115VAC at full load
    HOLD UP TIME (Typ.) 20ms/230VAC          16ms/115VAC at full load
    INPUT  VOLTAGE RANGE 90~ 132VAC      180 ~ 264VAC      
    FREQUENCY RANGE 47 ~ 63HZ
     EFFICIENCY (Typ.) 79.0% 80.0% 80.0%
    AC CURRENT (Typ.) 3.0A/115VAC        2.5A/230VAC
    INRUSH CURRENT (Typ.) Cold start < 80A (twidth<1000us measured at 50% lpeak) at 115/230VAC
    LEAKAGE CURRENT <1mA 
    PROTECTION  OVERLOAD A Type: 105 ~ 185% rated output power                            B Type: 105 ~ 140% rated output power
    Protection type: Hiccup mode, recovers automatically after fault condition is removed
    SHORT CIRCUIT Protection type: Hiccup mode, recovers automatically after fault condition is removed
    OVER VOLTAGE 4.6 ~ 5.4V 4.6~ 5.4V 5.7~ 7.0V
    Protection Type: Shut off o/p voltage, claping by zener diode
    OVER TEMPERATURE Shut down O/P voltage, recovers automatically after temperature goes down
    ENVIRONMENT WORKING TEMP. -35 ~ +60 (Refer to ”Derating Curve”)
    WORKING HUMIDITY 20~ 90%,RH non-condensing
    STORAGE TEMP., HUMIDITY -40 ~ +85°C,  10 ~ 95%RH
    TEMP. COEFFICIENT ±0.03%/°C (0 ~ 50°C)
    VIBRATION 10-500HZ,5G 10min./1 cycle, period for 60min. each along X, Y, Z axes
    SAFETY &
    EMC (Note.5)
    SAFETY STANDARDS UL60950-1, TUV60950-1 EAC TP 004 aprroved
    WITHSTAND VOLTAGE I/P-O/P:3KVAC  I/P-FG:2KVAC   O/P-FG0.5KVAC
    ISOLATION RESISTANCE I/P-O/P,I/P-FG:100MOhms/ 500VDC / 25℃/ 70%RH
    EMC EMISSION Refer to EN55022 (CISPR22) Class A, EAC TP TC020
    EMC IMMUNITY Refer to EN61000-4-5, 4KV, criteria A, EAC TP TC020
    OTHERS MTBF 283.069Khrs min.        MIL-HDBK-217F (25°C)
    DIMENSION 199.5*110.2*50(L*W*H)
    PACKING 0.75Kg; 20pcs/15.5Kg/1.63CUFT
    NOTE 1. All parameter NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
    2. Please refer to “static characteristics”.
    3. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire
    terminated with a 0.1uf & 47uf parallel capacitor.4. Tolerance: includes set up tolerance,
    line regulation and load regulation.
    5. Deratubg may be needed under low inout voltage. Please check the static characteriestic for more details.
    6. The power supply is considered a component which will be installed into a final equipement.
    The final equipment must be re-confirmed that it still meetsEMC directives.

    1231 200W  Single Output Switching Power Supply  DPR-200 series

    Dimension

    125612317y

    Terminal Pin No. Assignment    
    Pin No. Assigment
    1 AC/L
    2 AC/N
    3 FG
    4~6 DC OUTPUT -V
    7~9 DC OUTPUT +V

  • Previous:
  • Next:

  • Related Products

    WhatsApp Online Chat !