240W Single Output with PFC Function ITSP-240W

Features:


  • * Universal AC input / Full range
  • * Built-in active PFC function, PF>0.95
  • * Protections: Short circuit / Overload / Over voltage / Over Temperature
  • * Forced air cooling by built-in DC Fan
  • * Built-in fan ON / OFF control
  • * LED indicator for power on
  • * Fixed switching frequency at 90KHz
  • * 2 years warranty
  • Product Detail

    Product Tags

    MODEL SP-240-5 SP-240-7.5 SP-240-12 SP-240-15 SP-240-24 SP-240-30 SP-200-48
    OUTPUT DC VOLTAGE 5V 7.5V 12V 15V 24V 30V 48V
    RATED CURRENT 45A 32A 20A 16A 10A 8A 5A
    CURRENT RANGE 0 ~ 45A 0 ~ 32A 0 ~ 20A 0 ~ 16A 0 ~ 10A 0 ~ 8A 0 ~ 5A
    RATED POWER 225W 240W 240W 240W 240W 240W 240W
    RIPPLE&NOISE (max.)  Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p
    VOLTAGE ADJ. RANGE   4~6V 6~9V 10~14V 12~18V 20~28V 27~33V 41~56V
    VOLTAGE TOLERNCE  Note.3 ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±1.0%
    LINE REGULATION      Note.4 ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
    LOAD REGULATION    Note.5 ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5%
    SETUP, RISE TIME 800ms, 50ms        1500ms, 50ms/115VACat full load
    HOLD UP TIME (Typ.) 20ms/230VAC         20ms/115VAC at full load
    INPUT  VOLTAGE RANGE 88 ~ 264VAC          124 ~ 370VDC
    FREQUENCY RANGE 47 ~ 63HZ
     EFFICIENCY (Typ.) 79.0% 83.0% 86.0% 86.0% 87.0% 88.0% 89.0%
    AC CURRENT (Typ.) 3.6A/115VAC        1.8A/230VAC
    INRUSH CURRENT (Typ.) 25A/115VAC          40A/230VAC
    LEAKAGE CURRENT <2mA / 240VAC
    PROTECTION  OVERLOAD 105 ~ 150% rated output power
    Protection type: Hiccup mode, recovers automatically after fault condition is removed
    OVER VOLTAGE 6.3 ~ 7.5V 9.4 ~ 10.9V 14.7 ~ 17.5V 19 ~ 22.5V 29.5 ~ 35 34.7 ~ 41V 57.6 ~ 67.2V
    Protection Type: Shut off o/p voltage, claping by zener diode
    OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down      
    ENVIRONMENT WORKING TEMP. -10 ~ +60 (Refer to ”Derating Curve”)
    WORKING HUMIDITY 20%~ 90%,RH non-condensing
    STORAGE TEMP., HUMIDITY -20 ~ +85°C,  10 ~ 95%RH
    TEMP. COEFFICIENT ±0.05%/°C (0 ~ 50°C)
    VIBRATION 10-500HZ, 2G 10min./1 cycle, 60min. each along X, Y, Z axes
    SAFETY &
    EMC (Note 6)
    SAFETY STANDARDS UL60950-1, CCC GB4943 approved
    WITHSTAND VOLTAGE I/P-O/P:3KVAC  I/P-FG:2KVAC   O/P-FG0.5KVAC
    ISOLATION RESISTANCE I/P-O/P,I/P-FG:100MOhms/ 500VDC / 25℃/ 70%RH
    EMC EMISSION Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,3
    EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, light industry level, criteria A
    OTHERS MTBF 284Khrs min.        MIL-HDBK-217F (25°C)
    DIMENSION 215*115*29.3mm (L*W*H)
    PACKING 0.8Kg; 18pcs/15.4Kg/1.04CUFT
    NOTE 1. All parameter NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
    2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & parallel capacitor.
    3. Tolerance: includes set up tolerance, line regulation and load regulation.  
    4. The power supply is considered a component which will be installed to a final equipment. All the EMC tests are been executed by
     mounting kthe unit on a 230mm*230mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets
     EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”  
     5. Derating may be needed under low input voltages. Please check the derating curve for more details.

     

    LOGO1240W  Single Output with PFC Function  ITSP-240W

    Dimension

    11 22

    Terminal Pin No. Assignment   
    Pin No. Assigment
    1 AC/L
    2 AC/N
    3 FG
    4,5 DC OUTPUT -V
    6,7 DC OUTPUT +V

  • Previous:
  • Next:

  • Related Products

    WhatsApp Online Chat !