320W Quad Output with PFC Function ITQP-F320W

Features:


  • * Universal AC input / Full range
  • * Built-in active PFC function, PF>0.95
  • * Protections: Short circuit/ Overload/Over voltage/Over temperature
  • * CH1 & CH2 can be adjusted from -5% ~ +10%
  • * With powerw good and fail signal output
  • * LED indicator for power on
  • * Force air cooling by built-in DC fan
  • * 100% full load burn-in test
  • * 20A peak load capability for 24V channel
  • * 2 years warranty
  • Product Detail

    Product Tags

    MODEL QP-320Ⅳ QP-320Ⅵ
    OUTPUT OUTPUT NUMBER CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4
    DC VOLTAGE 5V 12V 24V -12V 5V 15V 24V -15V
    RATED CURRENT 20A 10A 3A 2A 20A 8A 3A 1.6A
    CURRENT RANGE 2.5~20A 0~10A 0.2~5A 0.2~2A 2.5~20A 0~10A 0.2~5A 0.2~1.6A
    PEAK CURRENT 20A 10A 20A,≦1ms(Note5) 2A 20A 10A 20A,≦1ms(Note5) 1.6A
    RATED POWER 316W
    RIPPLE&NOISE (max.) Note.2 100mVp-p 150mVp-p 150mVp-p 150mVp-p 100mVp-p 150mVp-p 150mVp-p 150mVp-p
    VOLTAGE ADJ. RANGE   CH1,2: +10,-5%
    VOLTAGE TOLERNCE  Note.3 ±3.0% ±3.0% +10,-6% ±10% ±3.0% ±3.0% +10,-6% ±10%
    LINE REGULATION      Note.4 ±1.0% ±2.0% ±2.0% ±3.0% ±1.0% ±2.0% ±2.0% ±3.0%
    LOAD REGULATION    Note.5 ±2.0% ±3.0% ±6.0% ±8.0% ±2.0% ±3.0% ±6.0% ±8.0%
    SETUP, RISE TIME 800ms, 50ms/230VAC                         3000ms, 50ms/115VAC at full load
    HOLD UP TIME (Typ.) 16ms at full load
    INPUT  VOLTAGE RANGE 90-264VAC               127-370VAC
    FREQUENCY RANGE 47 ~ 63HZ
    POWER FACTOR (Typ.) PF>0.95/230VAC      PF>0.98/115VAC at full load
    EFFICIENCY (Typ.) 83.0%
    AC CURRENT (Typ.) 4A/115VAC        2A/230VAC
    INRUSH CURRENT (Typ.) 25A/115VAC          45A/230VA
    LEAKAGE CURRENT <2mA / 240VAC
    PROTECTION  OVERLOAD 105 ~ 150% rated output power
    Protection type: Hiccup mode, recovers automatically after fault condition is removed
    OVER VOLTAGE CH1: 5.75~6.75V   CH2: 13.8~16.2VCH1: 5.75~6.75V   CH2: 17.25~20.25V
    Protection Type: Shut off o/p voltage,  re-power on to recover
    OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down
    ENVIRONMENT WORKING TEMP. -10 ~ +60 (Refer to output load derating curve)
    WORKING HUMIDITY 20%~ 90%,RH non-condensing
    STORAGE TEMP., HUMIDITY -20 ~ +85°C,  10 ~ 95%RH
    TEMP. COEFFICIENT ±0.03%/°C (0 ~ 50°C)
    VIBRATION 10-500HZ, 2G 10min./1 cycle, 60min. each along X, Y, Z axes
    SAFETY &
    EMC (Note 6)
    SAFETY STANDARDS UL60950-1, CCC GB4943 approved
    WITHSTAND VOLTAGE I/P-O/P:3KVAC  I/P-FG:2KVAC   O/P-FG: 0.5KVAC 1min.
    ISOLATION RESISTANCE I/P-O/P,I/P-FG:100MOhms/ 500VDC / 25℃/ 70%RH
    EMC EMISSION Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020
    EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, light industry level, criteria A TP TC 020       
    OTHERS MTBF 213.5Khrs min.        MIL-HDBK-217F (25°C)        
    DIMENSION 215*115*29.3mm (L*W*H)
    PACKING 1.2Kg; 20pcs/15.4Kg/0.92CUFT        
    NOTE 1. All parameter NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
    2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
    3. Tolerance: includes set up tolerance, line regulation and load regulation.  
    4. The power supply is considered a component which will be installed to a final equipment. All the EMC tests are been executed
    by mounting kthe unit on a 230mm*230mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it
    still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
    5.Every output channel can provide up to the maximum current, but total load can’t exceed the rated output power.
    6. CH3(24V) peak current 20A, ≦1ms, repeatable in every 100ms. CH3(24V) outout must be above 16V in the period of peak current.

    LOGO1 320W  Quad Output with PFC Function ITQP-F320W

     Dimension

    11 22

    Terminal Pin No. Assignment   
    Pin No. Assigment
    1 AC/L
    2 AC/N
    3 FG
    4 DC OUTPUT +V4
    5 DC OUTPUT +V3
    6 DC OUTPUT +V2
    7,8 DC OUTPUT -V
    9 DC OUTPUT +V1

  • Previous:
  • Next:

  • Related Products

    WhatsApp Online Chat !