500W Single Output DC-DC Converter DCS-500W

Features:


  • * DC input activesurge current limiting
  • * Wide 4:1~2:1 DC input range(24V:19~72VDC,96V:72~144VDC)
  • * Protections:Short circuit/Overload/Over voltage/Over temperature/Input polarity
  • * 2000VAC I/O Isolation
  • * Forced air cooling by built-in DC fan with fan speed control
  • * Output OK Signal
  • * 2 years warranty
  • Product Detail

    Product Tags

    MODEL DCS-500L-12 DCS-500L-24 DCS-500L-48 DCS-500H-12 DCS-500H-24 DCS-500H-48
    OUTPUT DC VOLTAGE 12V 24V 48V 12V 24V 48V
    RATED CURRENT 40A 21A 10.5A 40A 21A 10.5A
    CURRENT RANGE 0 ~ 40A 0 ~ 21A 0 ~ 10.5A 0 ~ 40A 0 ~ 21A 0 ~ 10.5A
    RATED POWER 480W 504W 504W 480W 504W 504W
    RIPPLE&NOISE (max.)Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p
    VOLTAGE ADJ. RANGE   11 ~ 15V 23 ~ 30V 46 ~ 60V 11 ~ 15V 23 ~ 30V 46 ~ 60V
    VOLTAGE TOLERNCE Note.3 ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
    LINE REGULATION  ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
    LOAD REGULATION  ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
    SETUP, RISE TIME 500ms, 50ms at full  load
    INPUT VOLTAGE RANGE Note.5 19 ~ 72VDC 72 ~ 144VDC
    EFFICIENCY (Typ.) 86.00% 88.00% 89.00% 87% 89% 90%
    DC CURRENT (Typ.) 24.2A/19VDC      24.8A/24VDC  12A/48VDC 8A/72VDC      6A/96VDC
    CURRENT (AT NO LOAD) Max.  0.2A/48VDC Max.  0.1A/96VDC
    INRUSH CURRENT (Typ.) 60A/48VDC 60A/96VDC
    PROTECTION  OVERLOAD 105 ~ 125% rated output  power
    Protection type : Constant current limiting, shut down o/p voltage after about 5 sec., re-power on to recover
    OVER VOLTAGE 16 ~ 19V 30.8 ~ 35.2V 62 ~ 68V 16 ~ 19V 30.8 ~ 35.2V 62 ~ 68V
    Protection type : Shut down o/p voltage, re-power on to recover
    OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down
    ENVIRONMENT WORKING TEMP. -25 ~ +60
    WORKING HUMIDITY 20 ~ 90% RH  non-condensing
    STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH non-condensing
    TEMP. COEFFICIENT ±0.02%/℃ (0 ~ 50℃)
    VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
    SAFETY & WITHSTAND VOLTAGE I/P-O/P:2KVAC      I/P-FG:2KVAC      O/P-FG:0.5KVAC
    EMC (Note 4) ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
      EMC EMISSION Compliance to EN55032 (CISPR32),EAC TP TC 020
      EMC IMMUNITY Compliance to EN61000-4-2,3,4,6,8, light industry level, criteria A, EAC TP TC 020
    OTHERS MTBF 196.3K hrs min. MIL-HDBK-217F  (25℃)
    DIMENSION 215*114*48.5mm (L*W*H)
    PACKING 0.75Kg;20PCS/15.5Kg/CTN
    NOTE 1. All parameter NOT specially mentioned are measured at 24,48,96VDC Input, rated load and 25°C of ambient temperature.
    2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
    3. Tolerance: includes set up tolerance, line regulation and load regulation. 
    4.The power supply is considered a component which will be installed into a final equipment.
    All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness.
    The final equipment must be re confirmed that it still meed EMC directives.
    For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
    5.Derating may be needed under low input voltages.Please check the derating curve for more details.
    6.The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with 
    fan models for operating altitude higher than 2000m.

     ico500W  Single Output DC-DC Converter  DCS-500 series

    Dimension

    455546

    Terminal Pin No. Assignment    
    Pin No. Assigment
    1 DC INPUT V+
    2 DC INPUT V-
    3 FG
    4~6 DC OUTPUT V-
    7~9 DC OUTPUT V+

     


  • Previous:
  • Next:

  • Related Products

    WhatsApp Online Chat !