75W Dual Output Switching Power Supply ITD-75W

Features:


  • * Universal AC input / Full range
  • * Protections: Short circuit / Overload / Over voltage
  • * Cooling by free air convection
  • * LED indicator for power on
  • * 100% full load burn-in test
  • * All using 105°C long life electrolytic capacitors
  • * Withstand 300VAC surge input for 5 seconds
  • * High operating temperature up to 70°C
  • * Withstand 5G vibration test
  • * High efficiency, long life and high reliability
  • * 2 years warranty
  • Product Detail

    Product Tags

    MODEL ITD-75Ⅰ ITD-75Ⅱ
      OUTPUT NUMBER CH1 CH2 CH1 CH2
    OUTPUT DC VOLTAGE 5V 12V 5V 24V
    RATED CURRENT 7A 3A 5A 2A
    CURRENT RANGE 1~8A 0.3~4A 1~6A 0.2~3A
    RATED POWER 71W 88W
    RIPPLE&NOISE (max.)  Note.2 80mVp-p 120mVp-p 80mVp-p 150mVp-p
    VOLTAGE ADJ. RANGE   CH1: 4.75 ~ 5.5V CH1: 4.75 ~ 5.5V
    VOLTAGE TOLERNCE  Note.3 ±2.0% ±6.0% ±2.0% ±6.0%
    LINE REGULATION      Note.4 ±0.5% ±1.0% ±0.5% ±1.0%
    LOAD REGULATION    Note.5 ±1.5% ±3.0% ±1.5% ±3.0%
    SETUP, RISE TIME 500ms, 30ms/230VAC      1200ms,30ms/115VAC at full load
    HOLD UP TIME (Typ.) 50ms/230VAC           10ms/115VAC at full load
    INPUT  VOLTAGE RANGE 88~ 264VAC    125 ~ -373VDC
    FREQUENCY RANGE 47 ~ 63HZ
     EFFICIENCY (Typ.) 78% 81%
    AC CURRENT (Typ.) 1.5A/115VAC        0.9A/230VAC
    INRUSH CURRENT (Typ.) COLD START 36A/230VAC
    LEAKAGE CURRENT <2mA / 240VAC
    PROTECTION  OVERLOAD 110 ~ 150% rated output power
    Protection type: Hiccup mode, recovers automaticallyafter fault condition is removed
    OVER VOLTAGE CH1: 5.75 ~ 6.75V CH1: 16.87 ~ 19.57V
    Protection Type: Hiccup mode, recovers automaticallyafter fault condition is removed
    ENVIRONMENT WORKING TEMP. -20 ~ +70 (Refer to ”Derating Curve”)
    WORKING HUMIDITY 20%~ 90%,RH non-condensing
    STORAGE TEMP., HUMIDITY -40 ~ +85°C,  10 ~ 95%RH
    TEMP. COEFFICIENT ±0.03%/°C (0 ~ 50°C) on CH1 output
    VIBRATION 10-500HZ, 5G 10min./1 cycle, period for 60min. each along X, Y, Z axes
    SAFETY &
    EMC (Note 6)
    SAFETY STANDARDS UL60950-1, CCC GB4943 approved
    WITHSTAND VOLTAGE I/P-O/P:3KVAC  I/P-FG:2KVAC   O/P-FG0.5KVAC
    ISOLATION RESISTANCE I/P-O/P,I/P-FG:100MOhms/ 500VDC / 25℃/ 70%RH
    EMC EMISSION Compliance to EN55032 (CISPR32) Class B, EN61000-3-2, EAC TP TC 020
    EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN5502, EN61000-6-2,
    heavy industry level, criteria A, EAC TP TC 020
    OTHERS MTBF 381.3Khrs min.        MIL-HDBK-217F (25°C)
    DIMENSION 104*97*29.5mm(L*W*H)
    PACKING 0.52Kg; 30pcs/16.6Kg/0.97CUF
    NOTE 1. All parameter NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
    2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & parallel capacitor.
    3. Tolerance: includes set up tolerance, line regulation and load regulation.
    4. Line regulation is measured from low line to high line at rated load.
    5. Load regulation is measured from 0% t0 100% rated load.
    6. The power supply is considered a component which will be installed to a final equipment.
    All the EMC tests are been executed by mounting kthe unit on a 230mm*230mm metal plate with 1mm of thickness.
    The final equipment must be re-confirmed that it still meets EMC directives.
    For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”

    7. The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with
    fan models for operating altitude higher than 2000mm(6500ft)

    LOGO175W  Dual Output Switching Power Supply ITD-75 series

     Dimension

    asfefssefsgef

    Terminal Pin No. Assignment
    Pin No. Assigment
    1 AC/L
    2 AC/N
    3 FG
    4, 6 DC OUTPUT -V
    5 DC OUTPUT +V2
    7 DC OUTPUT +V1

  • Previous:
  • Next:

  • Related Products

    WhatsApp Online Chat !