75W Single Output with PFC Function ITSP-75W

Features:


  • * Universal AC input / Full range
  • * Built-in active PFC function, PF>0.93
  • * Protections: Short circuit / Overload / Over voltage
  • * Built-in constant current limiting circuit
  • * Low profile: 33mm thickness
  • * LED indicator for power on
  • * 100% full load burn-in test
  • * Fixed switching frequency at PFC:67KHz PWM : 134KHz
  • * 2 years warranty
  • Product Detail

    Product Tags

    MODEL SP-75-3.3 SP-75-5 SP-75-7.5 SP-75-12 SP-75-13.5 SP-75-15 SP-75-24 SP-75-27 SP-75-48
    OUTPUT DC VOLTAGE 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V
    RATED CURRENT 15A 15A 10A 6.3A 5.6A 5A 3.2A 2.8A 1.6A
    CURRENT RANGE 0 ~ 15A 0 ~ 15A 0 ~ 10A 0 ~ 6.3A 0 ~ 5.6A 0 ~ 5A 0 ~ 3.2A 0 ~ 2.8A 0 ~ 1.6A
    RATED POWER 49.5W 75W 75W 75.6W 75.6W 75W 76.8W 75.6W 76.8W
    RIPPLE&NOISE (max.)  Note.2 80mVp-p 80mVp-p 80mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 100mVp-p 100mVp-p
    VOLTAGE ADJ. RANGE   3.14~3.63V 4.75~5.5V 7.13~8.25V 11.4~13.2V 12.8~14.9V 14.3~16.5V 22.8~26.4V 25.7~29.7V 45.6~52.8V
    VOLTAGE TOLERNCE  Note.3 ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±1.0% ±1.0% ±1.0%
    LINE REGULATION      Note.4 ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
    LOAD REGULATION    Note.5 ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
    SETUP, RISE TIME 800ms, 60msat full load
    HOLD UP TIME (Typ.) 36ms at full load
    INPUT  VOLTAGE RANGE 85-264VAC               120-370VDC
    FREQUENCY RANGE 47 ~ 63HZ
     EFFICIENCY (Typ.) 70.0% 76.0% 79.0% 81.0% 82.0% 82.0% 83.0% 83.0% 83.0%
    AC CURRENT (Typ.) 1.3A/115VAC        0.7A/230VAC
    INRUSH CURRENT (Typ.) COLD START 30A/230VAC
    LEAKAGE CURRENT <2mA / 240VAC
    PROTECTION  OVERLOAD 105 ~ 150% rated output power
    Protection type: Hiccup mode, recovers automatically after fault condition is removed
    OVER VOLTAGE 3.8~4.46V 5.75~6.75V 8.63~10.13V 13.8~16.2V 15.53~18.23V 17.25~20.25V 27.6~32.4V 31.05~36.45V 55.2~64.8V
    Protection Type: Shut off o/p voltage, claping by zener diode
    ENVIRONMENT WORKING TEMP. -10 ~ +60 (Refer to ”Derating Curve”)
    WORKING HUMIDITY 20%~ 90%,RH non-condensing
    STORAGE TEMP., HUMIDITY -20 ~ +85°C,  10 ~ 95%RH
    TEMP. COEFFICIENT ±0.05%/°C (0 ~ 50°C)
    VIBRATION 10-500HZ, 2G 10min./1 cycle, 60min. each along X, Y, Z axes
    SAFETY &
    EMC(Note 6)
    SAFETY STANDARDS UL60950-1, CCC GB4943 approved
    WITHSTAND VOLTAGE I/P-O/P:3KVAC  I/P-FG:2KVAC   O/P-FG0.5KVAC
    ISOLATION RESISTANCE I/P-O/P,I/P-FG:100MOhms/ 500VDC / 25℃/ 70%RH
    EMC EMISSION Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,3
    EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, light industry level, criteria A
    OTHERS MTBF 208.8Khrs min.        MIL-HDBK-217F (25°C)
    DIMENSION 104*97*29.5mm (L*W*H)
    PACKING 0.58Kg; 20pcs/12Kg/0.64CUFT
    NOTE 1. All parameter NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
    2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & parallel capacitor.
    3. Tolerance: includes set up tolerance, line regulation and load regulation.
    4. The power supply is considered a component which will be installed to a final equipment. All the EMC tests are been executed
    by mounting kthe unit on a 230mm*230mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still
     meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
    5. Derating may be needed under low input voltages. Please check the derating curve for more details.

     

    LOGO1 75W  Single Output with PFC Function ITSP-75W

    Dimension

    11 22

    Terminal Pin No. Assignment   
    Pin No. Assigment
    1 AC/L
    2 AC/N
    3 FG
    4 DC OUTPUT -V
    5 DC OUTPUT +V

  • Previous:
  • Next:

  • Related Products

    WhatsApp Online Chat !